正常施工溫度：通常，瀝青路面的碾壓溫度在正常施工情況下為130℃~140℃，且不低于120℃或110℃（根據不同規范略有差異）。這一溫度范圍有助于確保瀝青混合料的適當鋪設和壓實，從而保證路面的質量和耐久性。

　　Normal construction temperature: Generally, the rolling temperature of asphalt pavement is 130 ℃~140 ℃ under normal construction conditions, and not lower than 120 ℃ or 110 ℃ (slightly different according to different specifications). This temperature range helps ensure proper laying and compaction of asphalt mixture, thereby ensuring the quality and durability of the road surface.

　　低溫施工溫度：在低溫條件下施工時，碾壓溫度可能稍高，通常為140℃~150℃，且不低于130℃。這是為了應對低溫對瀝青混合料性能的影響，確保施工質量和路面性能。

　　Low temperature construction temperature: During construction under low temperature conditions, the rolling temperature may be slightly higher, usually between 140 ℃ and 150 ℃, and not lower than 130 ℃. This is to address the impact of low temperatures on the performance of asphalt mixtures, ensuring construction quality and pavement performance.

　　注意事項：終壓時溫度過高或過低都會對瀝青路面產生影響，因此需要嚴格控制溫度在適宜的范圍內，以保證路面的質量和使用壽命。

　　Attention: Excessive or insufficient temperature during final compaction can have an impact on asphalt pavement. Therefore, it is necessary to strictly control the temperature within an appropriate range to ensure the quality and service life of the pavement.

　　綜上所述，瀝青路面碾壓的適宜溫度需根據施工條件和瀝青類型進行適當調整，并嚴格控制在規定范圍內。

　　In summary, the appropriate temperature for rolling asphalt pavement should be adjusted according to the construction conditions and asphalt type, and strictly controlled within the specified range.

　　本文由濟南瀝青料提供幫助，更多的相關內容請點擊：http://m.gaohufs.com希望本文能夠?yàn)槟鷰韼椭?，感謝您的閱讀！

　　This article is assisted by Jinan Asphalt Material. For more related content, please click: http://m.gaohufs.com I hope this article can be helpful to you. Thank you for reading!