行業資訊
帶你認識常見的路面機械設備
來源：http://m.gaohufs.com/ 日期：2022-12-23
路面機械設備的種類很多，一般情況說起工程機械就是挖掘機、裝載機等常見的鏟土設備或者是起重機一類的設備。下面我們就來認識了解幾款濟南路面機械設備吧。
There are many types of road machinery and equipment. Generally speaking, construction machinery is the common shovel equipment such as excavators and loaders or the equipment such as cranes. Now let's get to know some Jinan road machinery and equipment.
攤鋪機
Paver
攤鋪機相對與其他大部分路面設備大家要稍微熟悉一些，但非專業人員想必也沒有做過深入了解，有些人可能還認為攤鋪機只是用來鋪瀝青路面的，其實不然，現在的有很多水穩層也是攤鋪機攤的，當然水穩也還有用挖掘機或平地機攤平的，但攤鋪機鋪的壓實度和平整度要好些，施工要求高的都用攤鋪機攤水穩。
The paver is a little familiar with most other pavement equipment, but non professionals must not have had a thorough understanding of it. Some people may still think that the paver is only used to pave asphalt pavement, but in fact, it is not. Many of the water stabilized layers are paved by pavers now. Of course, the water stabilized layer is also paved by excavators or graders, but the compactness and flatness of the paver are better, The paver shall be used to spread water stably for those with high construction requirements.
攤鋪機工作時由三個人操作，上面的多個面負責，根據自卸車和料斗里料的多少控制行走，自卸車走后折疊料斗，當然其它的上面也可以控制，但由于距離遠視線不好，所以后面兩端還要有兩個人專門負責操作。
The paver is operated by three people, and several surfaces above are responsible for the operation. The operation is controlled according to the amount of material in the dump truck and hopper. The dump truck folds the hopper after moving. Of course, other upper surfaces can also be controlled. However, due to the poor distance from the far view, two people are also responsible for the operation at the rear ends.
二、冷再生
2、 Cold regeneration
冷再生是在常溫下使用冷再生專用機械連續完成銑刨和破碎包括面層和部分基層在內的舊路面結構層、添加再生材料、拌和、攤鋪、碾壓等作業過程，重新形成具有一定承載能力的結構層。
Cold recycling refers to the process of continuously milling and crushing the old pavement structure layer, including the surface layer and some base layers, adding recycled materials, mixing, paving, rolling and other operations using special cold recycling machinery at room temperature, to re form a structural layer with a certain bearing capacity.
冷再生機是一種高率、多用途的施工機械。主要用于瀝青混凝土路面的銑刨以及添加瀝青、水等材料后的舊瀝青路面的再生。也可用于公路、城鄉道路、機場、碼頭、停車場等工程的基層、底層穩定土現場就地拌和作業。
Cold regenerator is a kind of construction machinery with high efficiency and multipurpose. It is mainly used for milling of asphalt concrete pavement and recycling of old asphalt pavement after adding asphalt, water and other materials. It can also be used for on-site mixing of base and bottom stabilized soil of highway, urban and rural roads, airport, wharf, parking lot and other projects.
三、銑刨機
3、 Milling machine
在工程機械迅速發展的今天，以前修路用挖掘機的場面不見了，取而代之的是銑刨機。
Today, with the rapid development of construction machinery, the scene of excavator used for road construction has disappeared and is replaced by milling machine.
前后各兩條履帶，四條小履帶看起來很敦實的感覺，每條履帶有一個立柱支撐，這就是傳說中的四輪獨立懸掛！行走馬達沒有護板，暴露在外，可能是常走柏油路不上山的緣故。銑刨箱上的液壓缸看起來很苗條，不過應該夠用了，畢竟是經過工程師匹配設計的。
There are two tracks at the front and two at the back. The four small tracks look very solid. Each track is supported by a column. This is the legendary four-wheel independent suspension! The traveling motor has no guard board and is exposed, which may be due to the fact that the asphalt road is often used instead of going up the mountain. The hydraulic cylinder on the milling box looks very slim, but it should be enough. After all, it is matched and designed by engineers.
這是靠液壓缸推動履帶上的柱子帶動履帶轉向的，為了使兩邊的履帶同步轉向，還用連桿把兩邊連在一塊。兩個方向盤是怎么控制的還不太清楚，兩個前履帶由連桿連著，兩個后履帶也由連桿連著，兩個方向盤應該是作用一樣，只是為了方便在不同的角度操作。
The hydraulic cylinder pushes the column on the track to drive the track to turn. In order to make the tracks on both sides turn synchronously, the connecting rod is used to connect the two sides. How the two steering wheels are controlled is not clear. The two front tracks are connected by connecting rods, and the two rear tracks are also connected by connecting rods. The two steering wheels should have the same function, just to facilitate operation at different angles.
后履帶的轉向機構，和前面一樣，只是后面沒有那么多東西，看起來明了些。
The steering mechanism of the rear track is the same as that of the front track, but there is not so much behind it. It looks clearer.
路面工程在工程建設方面占有很大的比重，同樣路面機械設備在整個工程機械當中也有著非常重要的地位，您有什么需求的話可以隨時來聯系我們http://m.gaohufs.com！
Pavement engineering occupies a large proportion in engineering construction, and pavement machinery and equipment also play a very important role in the whole engineering machinery. If you have any needs, you can contact us at any time http://m.gaohufs.com ！
公司地址：濟南市商河縣賈莊鎮民營經濟創業園
公司名稱:永誠廣建公路材料（山東）有限公司 
備案號：