行業資訊

瀝青混凝土的分類以及性質

來源：http://m.gaohufs.com/ 日期：2023-05-29

瀝青混凝土按所用結合料不同，可分為石油瀝青的和煤瀝青的兩大類；有些國家或地區亦有采用或摻用天然瀝青拌制的。下面來講講濟南瀝青混凝土的分類以及性質：

Asphalt concrete can be divided into two categories according to the different binders used: petroleum asphalt and coal tar asphalt; Some countries or regions also use or mix natural asphalt for mixing. Next, let's talk about the classification and properties of Jinan asphalt concrete:

瀝青混凝土的分類：

Classification of asphalt concrete:

1、按所用集料品種不同可分為：

1. According to the different types of aggregates used, they can be divided into:

碎石的、礫石的、砂質的、礦渣的數類，以碎石采用為普遍。按混合料大顆粒尺寸不同，可分為粗粒（35～40毫米以下）、中粒（20～25毫米以下）、細粒（10～15毫米以下）、砂粒（5～7毫米以下）等數類。

Crushed stone, gravel, sandy, and slag are commonly used. According to the different sizes of large particles in the mixture, it can be divided into several categories: coarse particles (less than 35-40 millimeters), medium particles (less than 20-25 millimeters), fine particles (less than 10-15 millimeters), and sand particles (less than 5-7 millimeters).

2、按礦料的級配不同可分為：

2. According to the different grading of mineral materials, it can be divided into:

密級配、半開級配和開級配等數類，開級配混合料也稱瀝青碎石。其中熱拌熱鋪的密級配碎石混合料經久耐用，強度高，整體性好，是修筑高級瀝青路面的代表性材料，應用得廣。

Dense graded, semi open graded, and open graded mixtures are also known as asphalt crushed stones. The dense graded crushed stone mixture of hot mix and hot paving is durable, high in strength, and has good integrity. It is a representative material for building high-grade asphalt pavement and has been widely used.

3、按礦料的組成不同可分為：

3. According to the composition of ore, it can be divided into:

密實-懸浮結構（如AC-Ⅰ）、骨架-空隙結構（如OGFC）和密實-骨架結構(如SMA)。

Dense suspended structure (such as AC - I), skeleton void structure (such as OGFC), and dense skeleton structure (such as SMA).

4、各國對瀝青混凝土制訂有不同的規范，中國制定的熱拌熱鋪瀝青混合料技術規范，以孔隙率10%及以下者稱為瀝青混凝土，又細分為Ⅰ型和Ⅱ型，Ⅰ型的孔隙率為3（或2）～6%，屬密級配型；Ⅱ型為6～10%，屬半開級配型；孔隙率10%以上者稱為瀝青碎石，屬開級配型；混合料的物理力學指標有穩定度、流值和孔隙率等。

4. Different countries have different specifications for asphalt concrete. The technical specifications for hot mix and hot laid asphalt mixtures formulated by China are called asphalt concrete with a porosity of 10% or less, and are further divided into Type I and Type II. Type I has a porosity of 3 (or 2) to 6%, which belongs to the dense grading type; Type II is 6-10%, belonging to the semi open graded type; Those with a porosity of more than 10% are called asphalt crushed stones and belong to the open graded type; The physical and mechanical indicators of the mixture include stability, flow value, and porosity.
濟南瀝青混凝土

瀝青混凝土的性質：

Properties of asphalt concrete:

瀝青混合料的強度主要表現在兩個方面：

The strength of asphalt mixtures is mainly manifested in two aspects:

一是瀝青與礦粉形成的膠結料的粘結力；

One is the bonding force of the binder formed by asphalt and mineral powder;

另一是集料顆粒間的內摩阻力和鎖結力。

The other is the internal frictional resistance and locking force between aggregate particles.

礦粉細顆粒（大多小于0.075毫米）的巨大表面積使瀝青材料形成薄膜，從而提高了瀝青材料的粘結強度和溫度穩定性；而鎖結力則主要在粗集料顆粒之間產生。

The huge surface area of fine particles of mineral powder (mostly less than 0.075 millimeters) forms a thin film of asphalt material, thereby improving the bonding strength and temperature stability of asphalt material; The locking force is mainly generated between the coarse aggregate particles.

選擇瀝青混凝土礦料級配時要兼顧兩者，以達到加入適量瀝青后混合料能形成密實、穩定、粗糙度適宜、經久耐用的路面。

When selecting the gradation of asphalt concrete mineral aggregate, both should be taken into account to achieve a dense, stable, moderately rough, and durable road surface after adding an appropriate amount of asphalt.

配合礦料有多種方法，可以用公式計算，也可以憑經驗規定級配范圍，中國采用經驗曲線的級配范圍。

There are various methods for mixing mineral materials, which can be calculated using formulas or specified based on experience. China adopts the grading range of the experience curve.

瀝青混合料中的瀝青適宜用量，應以試驗室試驗結果和工地實用情況來確定，一般在有關規范內均列有可資參考的瀝青用量范圍作為試配的指導。

The appropriate amount of asphalt in asphalt mixtures should be determined based on laboratory test results and practical conditions on the construction site. Generally, there are reference asphalt dosage ranges listed in relevant specifications as guidance for trial mixing.

當?shù)V料品種、級配范圍、瀝青稠度和種類、拌和設施、地區氣候及交通特征較固定時，也可采用經驗公式估算。

When the variety of mineral materials, grading range, asphalt consistency and type, mixing facilities, regional climate, and traffic characteristics are relatively fixed, empirical formulas can also be used for estimation.

瀝青混凝土的分類以及性質相關事項就講解到這里了，希望能夠給您好的幫助，更多事項就來我們網站http://m.gaohufs.com咨詢！

That's all for the classification and properties of asphalt concrete. We hope it can be of great help to you. For more information, please come to our website http://m.gaohufs.com consulting service

上一條：瀝青攤鋪機螺旋布料器無法工作的原因

下一條：瀝青使用時的五點注意事項